How To Carry Out Daily Maintenance Of Cone Crusher

The daily maintenance of cone crusher is an important part to ensure its efficient and stable operation. Here are some key daily maintenance steps and precautions:

Cleaning and Inspection:

Regularly clean the surface and surroundings of the crusher of accumulated dust, mineral sand, and other debris, especially paying attention to cleaning the dust sealing sleeve, sliding ring, and crossbeam of dust and mineral sand.

Check whether the connecting bolts of each component, including the cylinder body, lining plate, dust prevention device, etc., are tightened to prevent loosening or detachment.

Lubrication management:

Regularly check the working condition of the lubrication system to ensure sufficient and clean lubricating oil or grease.

According to the equipment manual, regularly replace lubricating oil or grease and clean the lubrication system.

Check the temperature and lubrication of the bearings. If the bearings are overheated or poorly lubricated, they should be stopped in a timely manner for inspection and treatment.

Observe the operating status:

During the operation of the crusher, pay attention to observing whether its vibration, noise, temperature and other parameters are normal.

If abnormal vibrations, increased noise, or temperature rise are found, the machine should be stopped immediately for inspection and troubleshooting.

Check vulnerable parts:

Regularly inspect the wear of vulnerable parts such as blades, liners, gears, etc. of the crusher.

If severely worn or damaged components are found, they should be replaced in a timely manner to avoid affecting the crushing effect and the normal operation of the equipment.

Electrical system inspection:

Regularly inspect the electrical system of the crusher, including whether the wiring of the motor, cables, switches, and other components is secure, and whether there are any short circuits, open circuits, or other situations.

Check if the insulation performance of electrical components is good, and replace them promptly if damaged.

Security protection inspection:

Regularly check whether the safety protection devices of the crusher are intact, such as protective covers, safety switches, etc.

Ensure that safety protection devices are functioning properly to protect the safety of operators.

Record and feedback:

After each routine maintenance, detailed records of maintenance content, inspection results, and identified issues should be kept.

If major faults or safety hazards are discovered, they should be reported to superiors in a timely manner and corresponding measures should be taken.

Training and guidance:

Provide daily maintenance training and guidance to operators to enhance their maintenance awareness and skill level.

Ensure that operators are proficient in operating and maintaining equipment to reduce the occurrence of malfunctions and extend the service life of the equipment.

By implementing the above daily maintenance measures, the normal operation of the cone crusher can be ensured and its service life can be extended. At the same time, it can also improve production efficiency and product quality, reduce operating costs and maintenance expenses.