The Difference Between Single Cylinder Cone Crusher And Multi Cylinder Cone Crusher

There are significant differences between single cylinder cone crushers and multi cylinder cone crushers in multiple aspects. The following is a detailed comparison and summary:

Applicable materials:

Single cylinder cone crusher: more suitable for processing soft ore and weathered ore, with a larger feeding capacity at the inlet.

Multi cylinder cone crusher: more suitable for processing medium hard and high hard ores. The harder the hardness, the greater the difference between the two.

Crushing effect:

Single cylinder cone crusher: The advantage of large throughput is more prominent when crushing soft and weathered ores.

Multi cylinder cone crusher: performs better in crushing medium hard and high hard ores. Its swing speed is faster than that of a single cylinder cone crusher, so there are more fine-grained materials in the finished product, with more uniform particle size and better crushing effect.

Production cost:

Single cylinder cone crusher: compact structure, small footprint, adopting PLC centralized control, easy maintenance, low failure rate, and relatively long service life. In the long run, it is worth investing in.

Multi cylinder cone crusher: The equipment foundation investment is small, and the price is relatively cheaper than that of a single cylinder, which can save production and investment costs for users.

Discharge adjustment method:

Single cylinder cone crusher: The spindle is rotating, and the size of the discharge port is adjusted by lifting or lowering the spindle through the action of a hydraulic cylinder.

Multi cylinder cone crusher: The main shaft remains stationary, mainly driven by the cylinder adjustment cap to drive the adjustment ring, causing it to rotate within the support sleeve, thereby adjusting the size of the discharge port.

Equipment structure and working mode:

Single cylinder cone crusher: The structure mainly consists of an upper frame, a lower frame, a transmission shaft, a moving cone, a hydraulic cylinder, a bias sleeve, etc. Its working mode is that after the material is added to the crushing chamber, the main shaft assembly rotates and slowly rotates under the resistance of the material, and the material is kneaded and crushed.

Multi cylinder cone crusher: The structure includes a support sleeve, a lower frame, a transmission shaft, a moving cone, an adjustment ring, a deflection sleeve, etc. The working mode is to crush the material by being impacted, kneaded, ground, and rubbed by the deflection shaft and the rolling mortar wall.

Crushing capacity:

If there is a high demand for production capacity, a multi cylinder cone crusher is a better choice. Under the same production time and motor power, the production capacity of a multi cylinder cone crusher is approximately twice that of a single cylinder cone crusher, reaching 1100 tons per hour.

Crushed material particle size:

The single cylinder cone crusher can crush materials with a larger particle size and can handle materials of about 560mm.

The particle size of the material crushed by the multi cylinder cone crusher cannot exceed 326mm.

In summary, there are significant differences between single cylinder cone crushers and multi cylinder cone crushers in terms of material adaptability, crushing effect, production cost, discharge adjustment method, equipment structure and working mode, crushing capacity, and particle size of crushed materials. Users can choose cone crushers that are more suitable for actual production according to their actual needs.